i5200/i5600/i5800 Scanner Support

A new version of the Scanner Firmware may also be available. It is highly recommended that the most recent Firmware version be used with this driver.

Operating System tested on:

• WINDOWS Vista; SP1 and higher
• WINDOWS Vista x64 Edition
• WINDOWS 7 (Home and Professional)
• WINDOWS 7 x64 Edition (Home and Professional)
• WINDOWS 8 and 8.1 (32-bit)
• WINDOWS 8 and 8.1 (64-bit)
• WINDOWS 10 (32-bit)(V1507)
• WINDOWS 10 (64-bit)(V1507)

Software Driver Versions 2.6.1 Release notes (English) - pdf

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is recommended. Please read the information at the link below for more information.

Installation Instructions:

1. Click on DownloadFirmware_i5000_XX_Series_v0x.x.x.exe and download to a temporary directory on your computer.
2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner. Note: When you launch the DownloadFirmware program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
3. Double click on the file, DownloadFirmware_i5000_XX_Series_v0x.x.x.exe.
4. When download is completed, cycle power on the scanner.

The current Firmware version of your scanner can be checked from the Kodak i5000s scanners Operator Control Panel under the Information option or by launching the "Scanner Validation Tool" (SVT) program found in the Start > All Programs > Kodak Document Imaging program group. Then choose the TWAIN driver, Setup, Settings, Device, Diagnostics, Logs.

i5000-Series Firmware, Version 4.4.11, Release Notes (English)- pdf

i5200V and i5600V Firmware, Version 4.4.11, Release Notes (English)- pdf

Which firmware file do you need?

• i5200/i5600/i5800: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
• i5200V/i5600V: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
• i5250/i5650/i5850 with firmare version 4.3.00 or greater: DownloadFirmware_i5000_50_Series v0x.xx.xx.exe

(If in doubt, you can try both . . . only one will work and no harm will be done.)

NOTE: With the firmware 4.3.0 and higher installed, the Kodak i5000 scanners will have separate installer packages for the i5x00 and i5x50 models. The firmware installer file will now have "00" in the file name to denote that it will install on an i5x00 scanner (i5200/i5200v/i5600/i5600v/i5800) or it will have a "50" in the file name to denote that it will install on an i5x50 scanner (i5250/i5650/i5850). If a Kodak 5x50 scanner is updated to firmware 4.3.0 or higher, the firmware installer must have a "50" (DownloadFirmware_i5000_50_Series_v0x.xx.xx.exe) in the name or it will not install.

This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i5000..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i5000..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

KOFAX VRS Support

For applications that require VRS support, Kodak recommends the KODAK i5200V or i5600V Scanners with built-in "hardware" VRS support. No VRS license is needed with the i5200V or i5600V Scanners.

The Kodak i5200 and i5600 Scanners have been certified by Kofax with the following VRS versions:

• VRS 4.5 (sp1) <-Component Installer update required
• VRS Elite 5.0  <-Component Installer update required
• VRS Elite 5.1

For more information see the Kofax Scanner Configurator.

TWAIN Integrator Kit

The Kodak TWAIN Integrator Kit contains contains information required to write TWAIN enabled applications for Kodak Alaris' document scanners. This documentation includes custom CAPablities and header files for the Kodak Data Source. This file also contains information on the custom properties exposed by Kodak Alaris' WIA driver.