A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.
Firmware Installation Instructions:
NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.
If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.
Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.
Operating System tested on:
Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:
Required Firewire Card Driver changes for Windows 7
All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.
Supported Firewire Cards for KODAK Scanners
Software Driver Versions CD 1.33 Release Notes
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.
Brightness and Contrast Control
The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:
For more information see the Kofax Scanner Configurator.
The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
Increasing the Scanner Log History of KODAK Scanners
Definitionen für die Betriebssystem-Kompatibilität
Unterstützt – Von Kodak validiert
Nicht unterstützt – Nicht validiert
Hinweise:
Dieser Scanner enthält einen nichtflüchtigen Speicher (NVRAM) und einen flüchtigen Speicher (SDRAM).
Flüchtiger Speicher (DDR2) wird zum Speichern der Bilddaten des Kunden verwendet. Beim Ausschalten des Geräts wird er gelöscht.
Im nichtflüchtigen Speicher (EEPROM) werden Programmdaten, Scannereinstellungen und Scannerkalibrierungsdaten gespeichert. Es werden keine Bilddaten des Kunden im nichtflüchtigen Speicher gespeichert.
Die einzigen Scannereinstellungen, die permanent gespeichert werden, sind die Energy Star-Einstellungen. Es werden keine weiteren Kundendaten im nichtflüchtigen Speicher gespeichert.
HINWEIS: Die Bilddaten werden an einen PC übergeben, der eigene Möglichkeiten zum Speichern von Bildern und Informationen hat. Der Kunde muss überlegen, welche Vorsichtsmaßnahmen zum Sichern der Daten auf dem PC zu treffen sind.
Möchten Sie unsere Produkte optimal nutzen? Lesen Sie häufig gestellte Fragen zu diesem Produkt.
Wenden Sie sich an Ihren Wiederverkäufer, um Zubehör und Verbrauchsmaterialien zu kaufen. Wenn Sie nicht wissen, wer Ihr Wiederverkäufer ist, füllen Sie bitte das Frageformular unten aus.
Sie haben Fragen? Füllen Sie das Informations-Formular unten aus und wir kontaktieren Sie.
Kodak Alaris ist ein führender Anbieter von Informationserfassungs- und intelligenten Dokumentenverarbeitungslösungen, die Geschäftsprozesse vereinfachen. Wir unterstützen Unternehmen, Informationen sinnvoll mit intelligenten, vernetzten Lösungen zu nutzen, basierend auf innovativer Bildwissenschaft, die seit Jahrzehnten unsere Kernkompetenz darstellt. Unsere ausgezeichneten Scanner, Software und Services sind weltweit über unser Netzwerk an Vertriebspartnern verfügbar.
Datenschutzerklärung | Rechtliche/Website-Bedingungen | Hinweis zur Abholung in Kalifornien | Meine persönlichen Daten nicht weitergeben
© 2024 Kodak Alaris Inc. TM/MC/MR: Alaris, ScanMate. Alle Marken und Markennamen sind Eigentum ihrer jeweiligen Inhaber. Die Marke Kodak und das Logo von Kodak werden unter Lizenz von der Eastman Kodak Company verwendet.