i1405/i1410/i1420/i1440 Series Scanner Support

This product is no longer sold as new.

Drivers & Software

i1400 Scanner Drivers

Installing the scanner drivers from the link on the bottom of this page will install the latest Smart Touch drivers for the i1400 Series Scanners. These drivers will also support the KODAK A4 Flatbed and A3 Scanner when attached to a KODAK i1400 Series Scanner. The KODAK i1400 also now supports the KODAK Legal Flatbed. These drivers can be found on the Flatbed Driver page.

Note: If you are using Kofax VRS with an i1420 or i1440 Scanner, please follow these instructions. Download .pdf file with instructions

TWAIN / ISIS Drivers tested on:

  • WINDOWS XP Pro SP2/SP3 (32-bit)
  • WINDOWS XP x64 edition SP2
  • WINDOWS VISTA SP1/SP2 (32-bit and 64-bit)
  • WINDOWS 2003 SERVER x64 Edition
  • WINDOWS 7 (32-bit and 64-bit) SP1
  • WINDOWS 8 (32-bit and 64-bit)

Dependencies: Microsoft .Net 2.0 and Microsoft Installer 3.x

Linux distributions which are fully supported on 32-bit Operating Systems (user interface requires Mono Version 1.26 or higher):

  • Ubuntu 8.06+
  • Fedora 9+
  • SUSE 11.1+

Software Driver CD version 3.09 (Windows) and version 3.09 (Linux) included with the latest SVT- October, 2013

New Release Notes (English only)

Note: When installing i1400 or the Flatbed drivers for the first time:

  • DO NOT connect or power on the scanner or the flatbed to the host PC until the SVT has been installed.
  • DO NOT uninstall the previous Versions of this Device Driver installation, as this will update the current installation.
  • Shutdown all applications, as the PC will require a reboot to finalize the installation. This will ensure Microsoft's plug and play technology will properly recognize the Scanner or Flatbed.

User guides are not installed with this download, please see the user guide section of this web site for the latest version. The Smart Touch application is not part of this download, only the drivers needed to run Smart Touch are supplied. For updated Smart Touch drivers, click on the "View All Drivers & Downloads" button at the top of page.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Note: Expand the above (e.g. tar -zxf*.gz) and then run the setup script

Important: After upgrading the software, the scanner may need to be power cycled

TWAIN Integrator Kit

The Kodak TWAIN Integrator Kit contains contains information required to write TWAIN enabled applications for Kodak Alaris' document scanners. This documentation includes custom capablities and header files for the Kodak Data Source. This file also contains information on the custom properties exposed by Kodak Alaris' WIA driver.

By downloading from Kodak Alaris, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary

Specifications

Recommended Daily Volume
i1405: Up to 9,000 pages per day
i1420: Up to 12,000 pages per day
i1440: Up to 15,000 pages per day
Throughput Speeds*

(200 dpi landscape, letter-size, black-and-white/grayscale/color)
i1405: Up to 45 ppm/90 ipm
i1420: up to 60ppm/120 ipm
i1440: up to 75ppm/150 ipm *(throughput speeds may vary depending on your choice of driver, application software, operating system and PC)
Scanning Technology
i1405/i1420/i1440 dual CCD
Grayscale output bit depth is 256 levels (8-bit)
Color capture bit depth is 48 bits (16x3)
Color output bit depth is 24 bits (8x3)
Optical Resolution
600 dpi and optional A3 flatbed accessory
Illumination
Dual fluorescent (cold cathode) dpi
Output resolution
75, 100, 150, 200, 240, 250, 300, 400, 600 and 1200 dpi
Maximum Document Size
297mmx863 mm (11.7in.x34in.); for i1440, on long document mode: 254 mm x 6.1 m (10 in. x 240 in.)
Minimum Document Size
64 mm x 89 mm (2.5 in. x 3.5 in.)
Paper Thickness and Weight
34–413 g/m² (9–110 lb.) paper
Feeder
Up to 150 sheets of 60 g/m² (16 lb.) paper
Multi-feed Detection
With ultrasonic technology
Connectivity
USB 2.0
Bundled Software
TWAIN, ISIS, SANE and Windows Imaging Architecture Drivers; Kodak Capture Desktop Software, and Smart Touch
Imaging Features (in the scanner)
Perfect Page Scanning; iThresholding; adaptive threshold processing; hole removal, streak filter, sharpness filter; deskew; autocrop; relative cropping; aggressive cropping; electronic color dropout; dual-stream scanning; interactive color, brightness and contrast adjustment; automatic orientation; automatic color detection; background color smoothing
i1440 only: segmented black-and-white images, automatic photo cropping, multiple electronic color dropout, trainable electronic color dropout, long document mode, special document mode, toggle patch
File Format Outputs
Single and multi-page TIFF, JPEG, RTF, PDF, searchable PDF
Imprinting
Post-scan document imprinter (i1420/i1440)
Accessories
Kodak A3 flatbed (black background) accessory with 1.8-meter (6 ft.) cable (i1420/i1440 only)
Electrical Requirements
100-240 V (International); 50/60 Hz; universal power supply included
Power Consumption
Scanner: sleep mode: <4 watts; Running: <60 watts
Scanner with A3 flatbed: sleep mode: <6 watts; Running: <70 watts
Environmental Factors
Operating temperature: 15–35° C (59–95° F)
Operating humidity: 15 to 76 percent relative humidity
Acoustical Noise(operator position sound pressure level)
Standby mode: <22 dB(A)
Operating mode: <57 dB(A)
Recommended PC Configuration
For documents up to 660 mm (26 in.) long at 400 dpi: Intel Core2, 2 GHz duo processor or equivalent, 2 GB RAM
For longer documents (only for i1440 long document mode)/higher resolutions: Intel Core2, 2 GHz duo processor or equivalent, 4 GB RAM
Note: For optimal performance when using a PC running the Windows 7 operating system, at least 3 GB RAM is recommended.
Approvals and Product Certifications
AS/NZS 3548 Class B (C-Tick Mark), CAN/CSA-C22.2 No. 60950 (C TUV Mark), Canada ICES-003 Issue 3 (Class B), GB4943, GB9254 (Class B), GB 17625.1 Harmonics (CCC "S&E" Mark), EN 55022 ITE Emissions (Class A), EN 61000-3-2 Harmonics, EN 61000-3-3 Flicker, EN 55024 ITE Immunity (CE Mark), EN 60950 (TUV GS Mark), IEC 60950, CISPR 22 Class B, VCCI (Class B), CNS 13438 (Class B and BSMI Mark), UL 60950 (TUV US Mark), CFR 47 Part 15 Subpart B (FCC Class B), Argentina S-Mark
Consumables Available
Feed module, separation module, feed rollers, roller cleaning pads, Staticide Wipes, image guides, pre-separation pad, inkjet cartridge holder, inkjet cartridges, ink blotters
Dimensions
Weight: i1405/i1420/i1440: 10.4 kg (23 lbs.)
Depth: 30 cm (11.8 in.) not including input tray and output tray
Width: 54.7 cm (21.5 in.)
height: i1405/i1420/i1440: 36.5 cm (14.4 in.)

Operating System Compatibility

 

Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows XP SP2 and SP3 (32-bit )
  • Windows XP x64 Edition SP2
  • Windows Vista SP1 (32-bit and 64-bit)
  • Windows 7 (32-bit and 64-bit)
  • Windows 8 (32-bit and 64-bit)
  • Linux Ubuntu 8.04*
  • Linux Fedora 9*
  • Linux SUSE 11*

*Smart Touch does not work on these Operating Systems

Data Security

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

Manuals & Guides

FAQ

Do you want to get the most from our products? Read frequently asked questions about this product.

Get Help

Need help? Complete the information request form below and we will contact you.To place a service request for warranty or contract equipment in the US or Canada, click here.

Thank you for submitting your information. We will be in touch soon.
Submit error