i610/i620/i640/i660 Scanner Support

This product is no longer sold as new.

Drivers & Software

i600 Series Scanner Drivers

Installing the scanner drivers will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i600 Series Scanners.

Operating System tested on:

  • WINDOWS Vista
  • WINDOWS 7 (32 bit and 64 bit)

Note:  When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:

Required Firewire Card Driver changes for Windows 7

All i600 Series Scanners should be brought up to this level of Host Software, and the Firmware should be updated to v4.0.3 or higher after the new SVT is installed.

Supported Firewire Cards for KODAK Scanners

Software Driver Versions CD 4.6 Release Notes

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

ISIS Driver Update
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i600..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i600..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

i600 Scanner Firmware

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.

Installation Instructions


If the computer that is connected to the KODAK i600 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.

  1. Click on InstallFW_i600_v4.0.3.exe and download to a temporary directory on your computer.
  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.
    Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
  3. Double click on the file, InstallFW_i600_v4.0.3.exe
  4. When download is completed, cycle power on the scanner.

The Firmware version can be checked by selecting the "Info" tab of the SVT.

Release Notes for i600 firmware version 4.0.3

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Brightness and Contrast

The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

TWAIN Integrator Kit

The information posted here is intended for use by scan-enabled application programmers. Scanner operator, user, administrator, or systems setup and support information can be found in the "User Manuals" section.


Recommended Daily Volume
i610/i620 up to 80,000 pages per day
i640 up to 100,000 pages per day
i660 up to 120,000 pages per day
Throughput Speeds (200 dpi, landscape, letter size documents)

i610*/i620:  80 ppm (up to 320 ipm**)
i640:  100 ppm (up to 400 ipm)
i660:  120 ppm (up to 480 ipm)

ppm = pages per minute; ipm = images per minute

Scanning Technology
Dual Tricolor Plus CCD, Grayscale output bit depth is 256 levels (8-bit); Color* capture bit depth is 40-bit (10 bits per red, green, blue and black channels); Color* output bit depth is 24-bit
Optical resolution
300 dpi
Dual long-life Xenon lamps per side, mercury-free
Output resolution
Color*: 100/150/200/240/300 dpi
Grayscale: 100/150/200/240/300 dpi
Bitonal: 200/240/300/400 dpi
Maximum Document Size
305 x 863 mm (12 x 34 in.)
Minimum Document Size
64 x 64 mm (2.5 x 2.5 in.)
Paper Thickness and Weight
With Standard feeder: 45 g/m² (12 lb.) bond to 200 g/m² (110 lb.) index; With Ultra-Lightweight feeder accessory: 25 g/m² (7 lb.) rice paper to 75 g/m² (20 lb.) bond
Automatic feeder/elevator
500-sheet elevator-design document feeder with four settings: continuous feed, 100-sheet, 250-sheet and full 500-sheet batches
Multi-feed Detection
3-D multi-feed detection with ultrasonic technology; three ultrasonic sensors that can work together or independently
IEEE-1394 (FIREWIRE) Interface, 6-pin connector; IEEE-1394 card and cable included
Interface Support
TWAIN and ISIS drivers (included); KODAK Capture Pro Software; VRS Ready
Imaging Features (in the scanner)
Perfect Page Scanning with iThresholding, automatic color detection, autocrop, aggressive crop, deskew, electronic color dropout, dual stream scanning, orthogonal rotation, error diffusion, halftone removal, noise removal, toggle patch
On-board Compression
CCITT Group IV; JPEG or uncompressed output
File Format Outputs
JPEG (for color* and grayscale images); TIFF (for bitonal images)
Front pre-scan imprinting
Electrical Requirements
100-240 V, 50/60 Hz
Environmental Factors
ENERGY STAR qualified scanners, D.O.C. Executive Order 13221 Compliant Section 508 Compliant, Executive Order 13221 Compliant, Section 508 Compliant, Mercury-free Xenon lamps, Operating temperature: 15–35°C (59–95°F), Operating humidity: 15% to 76% RH
Acoustical Noise (operator position sound pressure level
Standby mode: <42 dB(A)
Operating mode: <61 dB(A)
Recommended PC Configuration
PENTIUM 4 2.4 GHz processor with 512 MB RAM or greater
Height: 40 cm (15.7 in.)
Width: 61 cm (23.9 in.)
Depth: 77 cm (30.3 in.)
Weight: 38.6 kg (85 lbs.)
Approvals and Product Certifications
AS/NZS 3548 Class A (C-Tick Mark), CAN/CSA-C22.2 No. 60950 (C-UL Mark), Canada ICES –Certifi cations 003 Issue 3 (Class A), GB4943, GB9254 (Class A), GB 17625.1 Harmonics, (CCC “S&E” Mark), EN 55022 ITE Emissions (Class B), EN 61000-3-2 Powerline Harmonics, EN 61000-3-3 Flicker, EN 55024 ITE Immunity (CE Mark),EN 60950 (TUV GS Mark), IEC 60950, CISPR 22 Class B, VCCI (Class A), CNS 13438 (Class A) (BSMI Mark), UL 60950 (UL Mark), CFR 47 Part 15 Subpart B (FCC Class A)
Consumables Available
Feeder consumables kit, extra-large feeder consumables kit, imaging guide set, high-capacity printer ink cartridge and carrier, transport cleaning sheets, roller cleaning pads, printer ink blotters, Staticide Wipes, calibration targets, black imaging background
Ultra-lightweight feed module; White imaging background; Manual feeder; Short document tray

* the i610 model does not scan in color

** images per minute speeds based on simultaneous output of four compressed images for each document scanned—bitonal and color or bitonal and grayscale

Specifications subject to change without notice. Throughput speeds may vary depending on your choice of driver, application software, operating system and PC.

Operating System Compatibility


Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows 2000
  • Windows XP Pro SP2/SP3 (32-bit)
  • Windows Vista (32-bit)
  • Windows 7 (32-bit)1,2
  • Windows 7 (64-bit)1,2

Not Supported – Customer Validated

  • (none)

Not Supported – Not Validated

  • Windows 95
  • Windows 98SE
  • Windows ME
  • Windows NT
  • Windows 2003 Server
  • Windows 2008 Server
  • Windows XP Pro (64-bit)
  • Windows Vista (64-bit)
  • Windows 8.x (32-bit)
  • Windows 8.x (64-bit)
  • Windows 10 (32-bit)
  • Windows 10 (64-bit)
  • Linux3
  • Mac


  1. Requires use of "legacy" IEEE 1394 (Firewire) device driver
  2. Firmware download not supported on Windows 7 host PC
  3. There is an untested SANE backend for this scanner (www.sane-project.org)

Manuals & Guides


Do you want to get the most from our products? Read frequently asked questions about this product.

Ask a Question

To place a service call for warranty or contract equipment, please click here.

Have a question? Complete the information below and we will contact you.

Thank you for submitting your information. We will be in touch soon.
Submit error