i730/i750/i780 Scanner Support

This product is no longer sold as new.

Drivers & Software

i700 Series Drivers

Installing the scanner drivers from the link will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i700 Series Scanners.

Operating System tested on:

  • WINDOWS XP Pro (32bit only)
  • WINDOWS Vista (32bit only)
  • WINDOWS 7 (32bit and 64bit)

Notes:

  1. When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:

    Required Firewire Card Driver changes for Windows 7

  2. Some new features require firmware update. See driver release notes on this page for more information. Follow this link to the i700 Firmware Download Page
  3. Customers using a host PC with Microsoft Windows 7 to update the scanner's firmware should contact Kodak Support for assistance. See the firmware release notes on the firmware download page for more information.

Supported Firewire Cards for KODAK Scanners

Software Driver Versions CD 1.22 Release Notes

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

 

ISIS Driver Update
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i700..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i700..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

i700 Scanner Firmware

Release Notes 2.4.0

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is recommended. Please read the information at the above link for more information.

Installation Instructions

NOTE: DO NOT ATTEMPT TO INSTALL AN i700 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.

If the computer that is connected to the KODAK i700 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes at the top of this page.

  1. Click on Install InstallFW_i700_v2.4.exe and download to a temporary directory on your computer.
  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.  Note:  When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
  3. Double click on the file, InstallFW_i700_v2.4.0.exe.
  4. When download is completed, cycle power on the scanner.

The current Firmware version of your scanner can be checked by launching the "Scanner Validation Tool" (SVT) program found in the Start > All Programs > Kodak Document Imaging program group. Then choose the TWAIN driver, Setup, Settings, Device, Diagnotics, Logs.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

TWAIN Integrator Kit

The information posted here is intended for use by scan-enabled application programmers. Scanner operator, user, administrator, or systems setup and support information can be found in the "User Manuals" section.

i700 Brightness and Contrast

Brightness and Contrast Control

The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Specifications

Recommended Daily Volume
up to 90,000 pages per day
Throughput Speeds*
90 ppm (360 ipm**)

*(up to 300 dpi, landscape, letter-size documents)
ppm=pages per minute, ipm=images per minute
Scanning Technology
Dual Tricolor Plus CCD, Grayscale output bit depth is 256 levels (8-bit), Color capture bit depth is 40-bit (10 bits per red, green, blue and black channels), Color output bit depth is 24-bit
Optical resolution
300 dpi
Illumination
Dual long-life Xenon lamps on each side, mercury-free
Output resolution
Color/Grayscale: 100/150/200/240/300 dpi, Bitonal: 200/240/300/400 dpi
Maximum Document Size
ADF: 305 mm x 1016 mm (12 in. x 40 in.), With short document exit tray: 164 mm x 164 mm (6.4 in. x 6.4 in.)
Minimum Document Size
64 mm x 64 mm (2.5 in. x 2.5 in.)
Paper Thickness and Weight
With Standard feeder: 45 g/m² (12 lb.) bond to 200 g/m² (110 lb.) index, With Ultra-Lightweight feeder accessory: 25 g/m² (7 lb.) rice paper to 75 g/m² (20 lb.) bond
Feeder/Elevator
500-sheet elevator-design automatic document feeder with four settings: continuous feed; 100-sheet, 250-sheet and full 500-sheet batches; Short document exit tray included
Multi-feed Detection
With ultrasonic technology; three ultrasonic sensors that can work together or independently
Connectivity
IEEE-1394 (FireWire) Interface, 6-pin connector, IEEE-1394 card and cable included
Interface Support
TWAIN and ISIS drivers (included); document capture software from Kodak, VRS Certified (SW).
Imaging Features
Perfect Page Scanning, iThresholding, automatic color detection, autocrop, aggressive crop, deskew, blank page detection and deletion, electronic color dropout, dual-stream scanning, orthogonal rotation, automatic orientation, halftone removal, noise removal, toggle patch
On-board Compression
CCITT Group IV; JPEG or uncompressed output
File Format Outputs
JPEG (for color and grayscale images); TIFF (for bitonal images)
Electrical Requirements
100-240 V, 50/60 Hz
Environmental Factors
Energy Star qualified scanners: Section 508 Compliant; D.O.C. Executive Order 13221 Compliant; Mercury-free Xenon lamps; Operating temperature: 15-35° C (59-95°F); Operating humidity: 15% to 76% RH
Acoustical Noise*
Standby mode: <42 dB(A); Operating mode: <61 dB(A)
*(operator position sound pressure level)
Recommended PC Configuration
Pentium 4 2.4 GHz processor with 512 MB RAM
Approvals and Product Certifications
AS/NZS CISPR 22 Class B (C-Tick Mark), CAN/CSA-C22.2 No. 60950-1-03, Canada ICES-003 Issue 3 (Class A), GB4943, GB9254 (Class A), GB 17625.1 Harmonics (CCC “S&E” Mark), EN 55022: 2006 ITE Emissions (Class B), EN 61000-3-3 Flicker, EN 55024:1998 ITE Immunity, (CE Mark), EN 60950-1 (TUV GS Mark), IEC 60950-1, CISPR 22 (Class B), VCCI (Class A), CNS 13438:2006 (Class A), (BSMI Mark), UL 60950-1, CFR 47 Part 15 Subpart B (FCC Class A), Argentina S-Mark
Consumables Available
Feeder consumables kit, extra-large feeder consumables kit, imaging guide set, printer ink cartridge and carrier, transport cleaning sheets, roller cleaning pads, printer ink blotters, Staticide wipes, calibration targets, black imaging background
Dimensions
Height: 40 cm (15.7 in.), Width: 61 cm (23.9 in.), Depth: 77 cm (30.3 in.) Weight: 38.6 kg (85 lbs.)

**ipm speeds based on dual-stream output of four compressed images for each document scanned—bitonal and color or bitonal and grayscale.

Operating System Compatibility

 

Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows 2000
  • Windows XP Pro SP2/SP3 (32-bit)
  • Windows Vista (32-bit )
  • Windows 7 (32-bit )1,2
  • Windows 7 (64-bit)1,2

Not Supported – Not Validated

  • Windows 8.x (32-bit)
  • Windows 8.x (64-bit)
  • Windows 10 (32-bit)
  • Windows 10 (64-bit)

Notes:

  1. Requires use of "legacy" IEEE 1394 (Firewire) device driver
  2. Firmware download not supported on Windows 7 host PC
  3. There is an untested SANE backend for this scanner (www.sane-project.org)

 

Data Security

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

Manuals & Guides

FAQ

Do you want to get the most from our products? Read frequently asked questions about this product.

Get Help

Need help? Complete the information request form below and we will contact you.To place a service request for warranty or contract equipment in the US or Canada, click here.

Thank you for submitting your information. We will be in touch soon.
Submit error