Controladores y software
i1800 Series Scanner Firmware
A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.
Firmware Installation Instructions:
NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.
If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.
- Click on the download button below and save to a temporary directory on your computer.
- Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.
Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
- Double click on the downloaded file in your temporary directory.
Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.
- When download is completed, cycle power on the scanner.
- Version number of the FW on the scanner can be confirmed using the Information key on the operator control panel.
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
i1800 Series Scanner Driver
Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.
Operating System tested on:
- WINDOWS XP Pro
- WINDOWS Vista (32 bit only)
- WINDOWS 7 (32 bit and 64bit)
Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:
Required Firewire Card Driver changes for Windows 7
All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.
Supported Firewire Cards for KODAK Scanners
Software Driver Versions CD 1.33 Release Notes
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
ISIS Driver Update
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.
Brightness and Contrast Control
Brightness and Contrast Control
The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
i1860 Kofax VRS Support
The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:
- VRS 4.2 <-Component installer update required
- VRS 4.5 (sp1)
- VRS Elite 5.0
For more information see the Kofax Scanner Configurator.
TWAIN Debug Log Creation
The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
ISIS Debug Log Creation
The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
Increasing the Scanner Log History of KODAK Scanners
Increasing the Scanner Log History of KODAK Scanners
Especificaciones
*(documento de 200 ppp, página vertical, tamaño carta)
(nivel de presión acústica en posición de operador)
WINDOWS Vista (solo de 32 bits)
WINDOWS 7 (32 y 64 bits)
Compatibilidad con los sistemas operativos
Operating System Compatibility Definitions
Supported – Kodak Validated
- Windows 2000
- Windows XP Pro SP2/SP3 (32-bit)
- Windows Vista (32-bit )
- Windows 7 (32-bit )1,2
- Windows 7 (64-bit)1,2
Not Supported – Not Validated
- Windows 8.x (32-bit)
- Windows 8.x (64-bit)
- Windows 10 (32-bit)
- Windows 10 (64-bit)
Notes:
- Requires use of "legacy" IEEE 1394 (Firewire) device driver
- Firmware download not supported on Windows 7 host PC
- There is an untested SANE backend for this scanner (www.sane-project.org)
Seguridad de los datos
Este scanner contiene almacenamiento no volátil (NVRAM) y memoria volátil (SDRAM).
La memoria volátil (DDR2) se utiliza para almacenar información de las imágenes de los clientes. Se elimina cuando se apaga el dispositivo.
La memoria no volátil (EEPROM) se utiliza para almacenar datos de los programas, la configuración del scanner y los datos de calibración del scanner. En la memoria no volátil no se almacena ningún tipo de información del cliente.
Los únicos ajustes del scanner que se almacenan de forma permanente son los de Energy Star. En la memoria no volátil no se almacena ningún otro tipo de información del cliente.
NOTA: la información de las imágenes se transfiere a un equipo con capacidad propia para almacenar imágenes e información. El cliente deberá considerar las precauciones que debe tomar para preservar la seguridad de los datos en el equipo.
Guías y manuales
Preguntas frecuentes
¿Desea aprovechar al máximo nuestros productos? Lea la sección de preguntas frecuentes acerca de este producto.
Suministros
Póngase en contacto con su distribuidor para comprar suministros y consumibles. Si no sabe quién es su distribuidor, complete el formulario para hacer una pregunta a continuación.
Ayuda
¿Necesita ayuda? Complete el formulario de solicitud de información y nos pondremos en contacto con usted.
ACERCA DE ALARIS, UNA DIVISIÓN COMERCIAL DE KODAK ALARIS
Kodak Alaris es un proveedor líder de captura de información y soluciones de procesamiento inteligente de documentos que simplifican los procesos comerciales. Existimos para ayudar al mundo a dar sentido a la información con soluciones inteligentes y conectadas impulsadas por décadas de innovación en la ciencia de la imagen. Nuestro software, escáneres y servicios profesionales galardonados están disponibles en todo el mundo y a través de nuestra red de socios de canal.
Síguenos!
Aviso de privacidad | Términos legales/del sitio | Aviso de recogida de California | No comparta mi información personal
© 2024 Kodak Alaris Inc. TM/MC/MR: Alaris, ScanMate. Todas las marcas y nombres comerciales utilizados son propiedad de sus respectivos titulares. La marca registrada y la imagen comercial de Kodak se usan bajo licencia de Eastman Kodak Company.