i5200/i5600/i5800 Scanner Support

This product is no longer sold as new.

Drivers & Software

i5000 Series Scanner Windows Drivers

A new version of the Scanner Firmware may also be available. It is highly recommended that the most recent Firmware version be used with this driver.

Operating System tested on:

  • WINDOWS Vista; SP1 and higher
  • WINDOWS Vista x64 Edition
  • WINDOWS 7 (Home and Professional)
  • WINDOWS 7 x64 Edition (Home and Professional)
  • WINDOWS 8 and 8.1 (32-bit)
  • WINDOWS 8 and 8.1 (64-bit)
  • WINDOWS 10 (32-bit)(V1507)
  • WINDOWS 10 (64-bit)(V1507)

Software Driver Versions 2.6.1 Release notes (English) - pdf

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

i5000 Series Scanner Firmware

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is recommended. Please read the information at the link below for more information.

Installation Instructions:

  1. Click on DownloadFirmware_i5000_XX_Series_v0x.x.x.exe and download to a temporary directory on your computer.
  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner. Note: When you launch the DownloadFirmware program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
  3. Double click on the file, DownloadFirmware_i5000_XX_Series_v0x.x.x.exe.
  4. When download is completed, cycle power on the scanner.

The current Firmware version of your scanner can be checked from the Kodak i5000s scanners Operator Control Panel under the Information option or by launching the "Scanner Validation Tool" (SVT) program found in the Start > All Programs > Kodak Document Imaging program group. Then choose the TWAIN driver, Setup, Settings, Device, Diagnostics, Logs.

i5000-Series Firmware, Version 4.4.11, Release Notes (English)- pdf

i5200V and i5600V Firmware, Version 4.4.11, Release Notes (English)- pdf

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Which firmware file do you need?

  • i5200/i5600/i5800: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
  • i5200V/i5600V: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
  • i5250/i5650/i5850 with firmare version 4.3.00 or greater: DownloadFirmware_i5000_50_Series v0x.xx.xx.exe

(If in doubt, you can try both . . . only one will work and no harm will be done.)

NOTE: With the firmware 4.3.0 and higher installed, the Kodak i5000 scanners will have separate installer packages for the i5x00 and i5x50 models. The firmware installer file will now have "00" in the file name to denote that it will install on an i5x00 scanner (i5200/i5200v/i5600/i5600v/i5800) or it will have a "50" in the file name to denote that it will install on an i5x50 scanner (i5250/i5650/i5850). If a Kodak 5x50 scanner is updated to firmware 4.3.0 or higher, the firmware installer must have a "50" (DownloadFirmware_i5000_50_Series_v0x.xx.xx.exe) in the name or it will not install.

 

 

i5000 Series ISIS Driver

This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i5000..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i5000..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

 

KOFAX VRS Support

For applications that require VRS support, Kodak recommends the KODAK i5200V or i5600V Scanners with built-in "hardware" VRS support. No VRS license is needed with the i5200V or i5600V Scanners.

The Kodak i5200 and i5600 Scanners have been certified by Kofax with the following VRS versions:

For more information see the Kofax Scanner Configurator.

 

TWAIN Integrator Kit

The Kodak TWAIN Integrator Kit contains contains information required to write TWAIN enabled applications for Kodak Alaris' document scanners. This documentation includes custom CAPablities and header files for the Kodak Data Source. This file also contains information on the custom properties exposed by Kodak Alaris' WIA driver.

Specifications

Throughput
140 pages per minute/560 images per minute **
Recommended Daily Volume
No limit with i5000 Series Scanners
Scanning Technology
CCD
Optical Resolution
600 dpi; 500 dpi B/W and Color
Output resolution
100 / 150 / 200 / 240 / 300 / 400 / 600 dpi
Illumination
White LEDs
Maximum Document Width
304.8 mm (12 in.)
Long Document Mode Length
Up to 4.6 m (180 in.)
Minimum Document Size
63.5 mm x 63.5 mm (2.5 in. x 2.5 in.)
 Paper Thickness and Weight
With standard feeder: 45 g/m2 (12 lb.) bond to 200 g/m2 (110 lb.) index
With ultra-lightweight feeder accessory: 25 g/m2 (7 lb.) rice paper to 80 g/m2 (20 lb.) bond
Feeder/Elevator
Automatic 750-sheet elevator design; automatic document feeder with four settings: continuous feed, 100-sheet, 250-sheet, 500-sheet and full 750-sheet batches
Multi-feed Detection
5 independent ultrasonic zones
Connectivity
USB 2.0 Certified, USB 3.0 compatible
Software Support
 Bundled software:TWAIN, ISIS and WIA drivers, Kofax certified.  Fully supported by Kodak Capture Pro Software and Kodak Asset Management Software
Features in the Scanner
Perfect Page Technology, streak fi lter, controlled stacking, iThresholding, automatic color detection, autocrop, aggressive crop, deskew, content-based blank page detection and deletion, multi-color dropout, dual-stream scanning, automatic orientation now with defaults, color on the fl y toggle patch, operator overrides
Output Compression
CCITT Group IV; JPEG or uncompressed output
Electrical Requirements
100-240 V (international), 50/60 Hz
Power Consumption

Sleep mode < 4 watts
Running: 215 watts
Standby: < 1.0 watts

Environmental Factors
EPEAT IconEPEAT Registered
Energy Star qualified scanners, 2008 EuP
Acoustical Noise
(operator position sound pressure level)

Standby mode: <39 dB(A); Scanning at 300 dpi <56 dB(A)

Recommended PC Configuration

PC: Intel® Core™ 2 Duo 3GHz, 4GB RAM, USB 2.0 or higher

Consumables Available
Feeder consumables kits, imaging guide set, printer ink cartridge and carrier, transport cleaning sheets, roller cleaning pads, printer ink blotters, Staticide Wipes, switchable black/white background
Accessories/Options
Enhanced Printer Accessory for Kodak Scanners, i5200 to i5600 upgrade, manual feed shelf, Document Extenders 66.04 cm, 76.02 cm and 86.36 cm (26˝, 30˝ and 34˝)
Dimensions

Height: 43.4 cm (17.1˝)

Width: 69.3 cm (27.3˝)

Depth: 51 cm (20.1˝) with tray closed, 65.3 cm (25.7˝) with tray

Weight
57.6 kg (127 lbs.)

**images per minute speed based on dual-stream output of four compressed images for each document scanner - bitonal and color or bitonal and grayscale.

Operating System Compatibility

 

Operating System Compatibility Definitions

Supported – Kodak Validated

  • WINDOWS VISTA (32-bit)
  • WINDOWS VISTA (64-bit)
  • WINDOWS 7 (32-bit)
  • WINDOWS 7 (64-bit)
  • WINDOWS 8 and 8.1 (32-bit)
  • WINDOWS 8 and 8.1 (64-bit)
  • WINDOWS 10 (32-bit)(V1507)
  • WINDOWS 10 (64-bit)(V1507)

 

Data Security

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

FAQ

Do you want to get the most from our products? Read frequently asked questions about this product.

How To

Kodak i5850 Scanner Intelligent Document Protection Feature
Kodak i5850 Scanner Post Scan Rear Printer
Controlled Dual Stacking Accessory for the Kodak i5800 scanner
Kodak i5000 Scanner Fast Scanning
Kodak i5800 Scanner - Height Adjustable
Kodak i5800 Scanner - 8.5 x 11" Documents

Ask a Question


Have a question? Complete the information below and we will contact you.

Thank you for submitting your information. We will be in touch soon.
Submit error