i1860 Scanner Support

This product is no longer sold as new.

Driver e software

i1800 Series Scanner Firmware

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.

Firmware Installation Instructions:

NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.

If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.

  1. Click on the download button below and save to a temporary directory on your computer.
  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.

    Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.

  3. Double click on the downloaded file in your temporary directory.

    Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.

  4. When download is completed, cycle power on the scanner.
  5. Version number of the FW on the scanner can be confirmed using the Information key on the operator control panel.

 Release Notes (en)

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.


i1800 Series Scanner Driver

Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.

Operating System tested on:

  • WINDOWS XP Pro
  • WINDOWS Vista (32 bit only)
  • WINDOWS 7 (32 bit and 64bit)

Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:

Required Firewire Card Driver changes for Windows 7

All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.

Supported Firewire Cards for KODAK Scanners

Software Driver Versions CD 1.33 Release Notes

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

 

ISIS Driver Update

This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

Brightness and Contrast Control

Brightness and Contrast Control

The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.


i1860 Kofax VRS Support

The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:

For more information see the Kofax Scanner Configurator.

TWAIN Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.

TWAIN DEBUG Logs Instructions

 

ISIS Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.

ISIS DEBUG Logs Instructions

 

Increasing the Scanner Log History of KODAK Scanners

Increasing the Scanner Log History of KODAK Scanners

 

Specifications

Recommended Daily Volume
Unlimited
Throughput Speeds*
Up to 200 pages per minute/800 images per minute (Throughput speeds may vary depending on your choice of driver, application software, operating system and PC.)

*(200 dpi landscape, letter-size document)
Scanning Technology
Dual Tricolor Plus CCD; Grayscale output bit depth is 256 levels (8-bit); Color capture bit depth is 40-bit (10 bits per red, green, blue and black channels); Color output bit depth is 24-bit
Optical resolution
300 dpi
Illumination
Dual Xenon lamps per side, mercury-free
Output resolution
Black and white: 200/240/300/400 dpi; Color/grayscale: 100/150/200/240/300 dpi
Maximum Document Size
305 mm x 990 mm (12 in. x 39 in.)
Minimum Document Size
64 mm x 64 mm (2.5 in. x 2.5 in.)
Paper Thickness and Weight
With standard feeder: 45 g/m² (12 lb) bond to 200 g/m² (110lb) index; With ultra-lightweight feeder: 25 g/m² (7 lb) rice paper to 80 g/m² (20 lb) bond
Feeder
500-sheet
Multi-feed Detection
Multi-feed detection with ultrasonic technology; three ultrasonic sensors that can work together or independently
Connectivity
IEEE-1394 (FireWire) interface, 6-pin connector; IEEE-1394 card and cable included
Interface Support
TWAIN and ISIS Drivers (included); KODAK Capture Software (optional), Kofax certified
Color Touch Screen Control
Operator control via color LCD touch screen
Ergonomic Height Adjustment
Integrated height adjustment span of 25 cm (10 in.) for seated or standing operation
Imaging Features
Perfect Page Scanning, iThresholding, autocrop, aggressive crop, deskew, image rotation, electronic color dropout, dual stream scanning, halftone removal, noise removal, zone processing, toggle patch, automatic color detection, automatic orientation
On-board Compression
CCITT Group IV, JPEG or uncompressed output
File Format Outputs
JPEG (for color and grayscale images); TIFF (for black and white images)
Image Address
Multi-level indexing/batching capabilities
Patch Readers
Four permanently mounted patch readers that can work together or independently
Imprinting
Front pre-scan or rear post-scan imprinting
Electrical Requirements
100-130 VAC, 50/60 Hz, 7 A; 200-240 VAC, 50/60 Hz, 3.5 A
Environmental Factors
Lead-free; Section 508 compliant; Mercury-free Xenon lamps; Operating temperature: 15-35° C (59-95° F); Operating humidity: 15 to 76 percent relative humidity
Acoustical Noise
(operator position sound pressure level)
Standby mode: <43 dB(A); Scanning at 300 dpi: <64 dB(A)

Minimum PC Configuration
Pentium 4 2.4 GHz processor with 512 MB RAM
Supported Operating Systems
WINDOWS XP Pro (32bit only)
WINDOWS Vista (32bit only)
WINDOWS 7 (32 and 64 bit)
Approvals and Product Certifications
IEC 60950-1:2005 + A1, UL 60950-1:2007, R12.11, CAN / CSA – C22 No. 60950-1-07+A1 2011, EN 60950-1:2006 +A1,+A11,+A12,Taiwan CNS 14336, Argentina IEC 60950-1:2005 +A1, CISPR 22:2002 (Class A), EN 55022:2010 (Class A) ITE Emissions, EN61000-3-2 Powerline Harmonics, EN61000-3-3 Flicker, EN55024 ITE Immunity, FCC Part 15 (Class A), Canada ICES-003 Issue 4 (Class A), Taiwan CNS 13438 (Class A), AS / NZS CISPR 22:2009 +A1:2010 (Class A), Marks – FCC, CE, cTUVus, GS, RCM, BSMI, Argentina S
Consumables Available
Feeder consumables kit, extra-large feeder consumables kit, extra-extra-large feeder consumables kit, ultralightweight feeder consumables kit, imaging guide set, printer ink cartridge, transport cleaning sheetS, roller cleaning pads, printer ink blotters, Staticide Wipes, calibration targets, black imaging background
Accessories/Options
Ultra-lightweight feed module, white imaging background, manual feeder
Dimensions
Weight: 218 kg (480 lb.); Depth: 99 cm (39 in.); Width (depending on touch screen position): 78-83 cm (31-33 in.); Height (adjustable): 102-127 cm (40-50 in.)

Operating System Compatibility

 

Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows 2000
  • Windows XP Pro SP2/SP3 (32-bit)
  • Windows Vista (32-bit )
  • Windows 7 (32-bit )1,2
  • Windows 7 (64-bit)1,2

Not Supported – Not Validated

  • Windows 8.x (32-bit)
  • Windows 8.x (64-bit)
  • Windows 10 (32-bit)
  • Windows 10 (64-bit)

Notes:

  1. Requires use of "legacy" IEEE 1394 (Firewire) device driver
  2. Firmware download not supported on Windows 7 host PC
  3. There is an untested SANE backend for this scanner (www.sane-project.org)

 

Data Security

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

Manuali e guide

Domande frequenti

Come ottenere il massimo dai nostri prodotti? Scopri le domande frequenti relative al prodotto.

Guida

Hai bisogno di assistenza? Completa il seguente modulo di richiesta informazioni e ti contatteremo.

Thank you for submitting your information. We will be in touch soon.
Submit error