i1860 Scanner サポート

*本製品の製造は終了しております。

ドライバおよびソフトウェア

i1800 Series Scanner Firmware

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.

Firmware Installation Instructions:

NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.

If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.

  1. Click on the download button below and save to a temporary directory on your computer.
  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.

    Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.

  3. Double click on the downloaded file in your temporary directory.

    Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.

  4. When download is completed, cycle power on the scanner.
  5. Version number of the FW on the scanner can be confirmed using the Information key on the operator control panel.

 Release Notes (en)

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.


i1800 Series Scanner Driver

Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.

Operating System tested on:

  • WINDOWS XP Pro
  • WINDOWS Vista (32 bit only)
  • WINDOWS 7 (32 bit and 64bit)

Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:

Required Firewire Card Driver changes for Windows 7

All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.

Supported Firewire Cards for KODAK Scanners

Software Driver Versions CD 1.33 Release Notes

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

 

ISIS Driver Update

This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.

Brightness and Contrast Control

Brightness and Contrast Control

The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.


i1860 Kofax VRS Support

The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:

For more information see the Kofax Scanner Configurator.

TWAIN Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.

TWAIN DEBUG Logs Instructions

 

ISIS Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.

ISIS DEBUG Logs Instructions

 

Increasing the Scanner Log History of KODAK Scanners

Increasing the Scanner Log History of KODAK Scanners

 

仕様

一日の推奨処理枚数
130,000枚以上
読み取り速度*
毎分最高 200 ページ/800 イメージ(読取り速度は使用するドライバ、アプリケーションソフトウェア、OS、および PC によって変わる場合があります。)

*(200dpi、A4サイズ横向きの場合)
スキャンテクノロジー
Tricolor Plus CCD(2基搭載)、グレースケール出力階調 256レベル(8 bit)、カラー読取階調 40bit (レッド、グリーン、ブルー、ブラックチャンネル各10bit)、カラー出力階調 24bit
光学解像度
300dpi
照明
水銀不使用のキセノンランプを両側に搭載
出力解像度
白黒: 200/240/300/400 dpi;カラー/グレースケール100/150/200/240/300dpi
書類サイズ(最大)
305 mm x 990 mm(12インチ x 39インチ)
最小原稿サイズ
64 mm x 64 mm(2.5インチ x 2.5インチ)
用紙の厚さおよび重量
標準フィーダ使用時: 45 g/m²(12ポンド)ボンド紙から 210 g/m² (110ポンド)インデックス;薄紙専用フィーダ使用時: 25 g/m² (7ポンド)半紙から 75 g/m² (20ポンド)ボンド紙
フィーダー容量
500枚
重送検知方式
超音波技術を採用した重送検出:3つの超音波センサが同時または個別に作動
接続インターフェース
IEEE-1394(FIREWIRE)、6ピンコネクタ(IEEE-1394アダプタおよびケーブル付属)
インタフェースのサポート
TWAIN および ISISドライバ(同梱)KODAK キャプチャプロソフトウェア(オプション)、Kofax認定
タッチスクリーン操作
カラーLCDタッチスクリーンによる操作
高さ調整
座り作業または立ち作業に合わせて最大25cm(10インチ)までの高さ調整が可能
イメージ処理機能
パーフェクトページ、iThresholding、自動枠消し、アグレッシブクロッピング、自動傾き修正、イメージ回転、エレクトロニックカラードロップアウト、デュアルストリーム スキャン、ハーフトーン除去、ノイズ除去、ゾーンプロセッシング、カラーパッチ、自動カラー識別機能、自動方向検出機能
圧縮方式
CCITT Group IV、JPEGまたは非圧縮出力
出力ファイル形式
JPEG(カラー/グレースケールの場合);TIFF(白黒の場合)
イメージアドレス
マルチレベル インデキシング/バッチ機能
パッチリーダ
移動不要のパッチリーダ(4箇所のパッチリーダを独立してON/OFFすることが可能)
インプリンタ
スキャン前に表面に印字 もしくは スキャン後に裏面に印字
電源要件
100-130VAC、50/60Hz、7A200-240VAC、50/60Hz、3.5A
環境要因
鉛不使用、第508項に準拠、水銀不使用のキセノンランプ;動作温度: 15~35°C(59~95° F)、動作湿度: 15~76% RH
騒音レベル
(操作位置の音圧レベル)
待機時: 43 dB(A)以下、300 dpi でスキャン時: 64 dB(A)以下

推奨PC
PENTIUM 4、2.4GHzプロセッサ、メモリ 512MB以上
サポートOS
WINDOWS XP Pro (32 ビットのみ)
WINDOWS Vista (32 ビットのみ)
WINDOWS 7 (32 ビットおよび 64 ビット)
適合規格
IEC 60950-1:2005 + A1、UL 60950-1:2007、R12.11、CAN / CSA – C22 No. 60950-1-07+A1 2011、EN 60950-1:2006 +A1、+A11、+A12、Taiwan CNS 14336、Argentina IEC 60950-1:2005 +A1、CISPR 22:2002 (クラス A)、EN 55022:2010 (クラス A) ITE Emissions、EN61000-3-2 Powerline Harmonics、EN61000-3-3 Flicker、EN55024 ITE Immunity、FCC Part 15 (クラス A)、Canada ICES-003 Issue 4 (クラス A)、Taiwan CNS 13438 (クラス A)、AS / NZS CISPR 22:2009 +A1:2010 (クラス A)、Marks – FCC、CE、cTUVus、GS、RCM、BSMI、Argentina S
消耗品
フィーダ交換キット、フィーダ交換キットラージパック、フィーダ交換キットエクストララージパック、超軽量フィーダ交換キット、イメージングガイドセット、プリンタ用インクカートリッジ、トランスポートクリーニングシート、ローラクリーニングパッド、プリンタインクブロッタ、静電クリーニングクロス、キャリブレーションシート、黒イメージバックグラウンド
アクセサリ/オプション
薄紙専用フィード モジュール、白バックグラウンド アクセサリ、マニュアル フィーダ
外形寸法
重量: 218 kg(480 ポンド)、奥行: 99 cm(39 インチ)、幅:(タッチスクリーンの位置による): 78~83 cm(31~33 インチ)、高さ:(調節可能): 102~127 cm(40~50 インチ)

OS の互換性

 

オペレーティングシステムの互換性の定義

サポート –コダック認定

  • Windows 2000
  • Windows XP Pro SP2/SP3(32 bit)
  • Windows Vista (32 bit)
  • Windows 7(32 bit)1、2
  • Windows 7(64 bit)1、2

サポートなし - 認定なし

  • Windows 8.x(32 bit)
  • Windows 8.x(64 bit)
  • Windows 10(32 bit)
  • Windows 10(64 bit)

注記:

  1. 「レガシー」 IEEE 1394 (ファイヤワイヤ)デバイス ドライバを使用する必要があります。
  2. Windows 7 のホスト PC ではファームウェアのダウンロードがサポートされていません。
  3. このスキャナーにはテストされていない SANE バックエンドがあります(www.sane-project.org)

 

データセキュリティ

このスキャナーには不揮発性メモリ(NVRAM)と揮発性メモリ(SDRAM)の両方が搭載されています。

揮発性メモリ(DDR2)は顧客のイメージデータの保管に使用されます。 装置の電源が切られるとメモリは失われます。

不揮発性メモリ(EEPROM)はプログラムデータ、スキャナー設定、スキャナーのキャリブレーションデータの保存に使用されます。 顧客のイメージデータは不揮発性メモリでは保管されません。

スキャナー設定のうち保管されるのはEnergy Star設定のみです。 その他の顧客データは不揮発性メモリでは保管されません。

注:イメージデータはPCに転送されて保管されます。 また、顧客はPCにデータを安全に保管するために事前に注意する必要があります。

マニュアルおよびガイド

よくある質問

当社の製品を最大限に活用することをご希望ですか? この製品に関するよくある質問をご確認ください。

お問い合わせ

Kodak Alaris ドキュメントスキャナーおよびソリューション関連製品に関する専用のお問合せ窓口です。  

【対応できない製品】デジタルカメラ、フィルムカメラ、デジタルフォトフレーム、インスタントカメラプリンター等のKodakブランド製品は弊社の取り扱い製品ではありません。弊社では対応できませんので、各製品の製造または販売元にお問合せください。

ご送信いただきありがとうございました。 早急にご連絡を差し上げます。
送信エラー