A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.
Firmware Installation Instructions:
NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.
If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.
Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.
Operating System tested on:
Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:
Required Firewire Card Driver changes for Windows 7
All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.
Supported Firewire Cards for KODAK Scanners
Software Driver Versions CD 1.33 Release Notes
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.
Brightness and Contrast Control
The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:
For more information see the Kofax Scanner Configurator.
The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
Increasing the Scanner Log History of KODAK Scanners
Definições de Compatibilidade Com o Sistema Operacional
Suportado – Validado pela Kodak
Não Suportado – Não Validado
Observações:
Este scanner contém memória não volátil (NVRAM) e memória volátil (SDRAM).
A memória volátil (DDR2) é usada para armazenar dados de imagens de clientes. Ela é apagada quando o dispositivo é desligado.
A memória não volátil (EEPROM) é usada para armazenar dados de programas, configurações de scanner e dados de calibração de scanner. Nenhum dado de imagem de cliente é armazenado na memória não volátil.
As únicas configurações de scanner recorrentes armazenadas são as configurações da Energy Star. Nenhum outro dado de cliente é armazenado na memória não volátil.
OBSERVAÇÃO: Os dados de imagens são passados a um PC que tenha capacidade própria de armazenar imagens e informações. O cliente também precisará considerar quais precauções precisam ser tomadas para proteger os dados no PC.
Deseja obter o máximo de nossos produtos? Leia as perguntas frequentes sobre este produto.
Entre em contato com seu revendedor para comprar suprimentos e consumíveis. Se você não sabe quem é seu revendedor, preencha o formulário de perguntas abaixo.
Precisa de ajuda? Preencha o formulário de solicitação de informações abaixo e entraremos em contato com você.
A Kodak Alaris é fornecedora líder de soluções de captura de informações e processamento inteligente de documentos que simplificam os processos de negócios. Existimos para ajudar o mundo a dar sentido às informações com soluções inteligentes e conectadas, alimentadas por décadas de inovação na ciência da imagem. Nosso premiado software, scanners e serviços profissionais estão disponíveis em todo o mundo e através de nossa rede de parceiros de canal.
Aviso de privacidade | Termos Legais/do Site | Aviso de coleta da Califórnia | Não compartilhe minhas informações pessoais
© 2024 Kodak Alaris Inc. TM/MC/MR: Alaris, ScanMate. Todas as marcas registradas e nomes comerciais utilizados são de propriedade de seus respectivos detentores. A marca comercial e a identidade visual da Kodak são usadas sob licença da Eastman Kodak Company.