A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.
Firmware Installation Instructions:
NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.
If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.
Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver and the latest WIA/STI drivers for the i1800 Series Scanners.
Operating System tested on:
Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:
Required Firewire Card Driver changes for Windows 7
All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.
Supported Firewire Cards for KODAK Scanners
Software Driver Versions CD 1.33 Release Notes
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe.
Brightness and Contrast Control
The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:
For more information see the Kofax Scanner Configurator.
The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.
Increasing the Scanner Log History of KODAK Scanners
受支持 – 柯达验证
不支持 – 未验证
注意:
此扫描仪包含非易失性存储 (NVRAM) 和易失性内存 (SDRAM)。
易失性内存 (DDR2) 用于存储客户影像数据。 设备关闭时这些数据将被擦除。
非易失性内存 (EEPROM) 用于存储程序数据,扫描仪设置以及扫描仪校准数据。 非易失性内存中不保存任何客户影像数据。
唯一永久存储的扫描仪设置是 Energy Star(能源之星)设置。 非易失性内存中不保存任何其它客户数据。
注: 影像数据将被传递到能够存储影像和信息的 PC 中。 客户还需要考虑必须采取哪些预防措施来保护 PC 上的数据。
您是否想充分利用我们的产品? 查看有关此产品的常见问题。
联系您的经销商购买耗材和消耗品。如果您不知道您的经销商是谁,请填写下面的提问表单。
需要帮助吗? 请填写下面的信息请求表,我们会联系您。
Kodak Alaris 是广受认可的数据采集及智能文档处理解决方案的提供商,致力于简化业务流程。我们的宗旨是以数十载的影像科学创新为后盾,通过智能化、互联的解决方案帮助各行各业的用户实现有效的信息利用。在全球直接提供和通过我们的渠道合作伙伴网络提供屡获大奖的扫描仪、软件和服务。
隐私声明 | 法律/网站条款 | 加州收集通知 | 不要分享我的个人信息
© 2024 Kodak Alaris Inc. TM/MC/MR: Alaris、ScanMate。所有商标和商品名称是各自拥有者的财产。柯达商标和商品外观是在取得 Eastman Kodak Company(伊士曼柯达公司)的授权下使用。