Drivers & Software
Firmware 3210 and 3610
Instructions:
Upgrading firmware on BBH Branded Trūper 3210 & 3610 scanner.
This firmware update has been provided to allow the conversion from the Bell and Howell (BBH) version of the Trūper 3210 or 3610 to a the KODAK version of the Trūper 3210 or 3610.
Please note that converting the scanner to KODAK branding will require you to update to the Kodak version of the Users Utility and scanner drivers by installing the KODAK Trūper installation CD version 1.0 or higher. A zipped version of this installation CD has been provided on our website for free download.
Supports updated electronics added to the product in December of 2012. Refer to the Release Notes for further details.
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
Bell and Howell Branded Scanner Drivers
Installing the scanner drivers from the link on the bottom of this page will install the latest OEM VRS, TWAIN Data Source, ISIS Driver and WIA/STI drivers for both the Bowe Bell and Howell Branded Trūper 3210 Flatbed & 3610 Rotary Scanners. For more information please read the Release Notes posted on this page. Note: You must unzip the downloaded file in a separate directory and then run the Setup.exe file.
If your scanner displays in Windows Device Manager as a "BBH" Scanner as shown below then your scanner is a Bowe Bell and Howell Branded Trūper 3210 or 3610 Scanner:
Operating System tested on:
- WINDOWS 2000
- WINDOWS XP Pro (32bit only)
- WINDOWS Vista (32 and 64bit)
Note: Windows 7 (32bit and 64bit) tested drivers are available for the Kodak Branded version of this scanner. Upgraded instructions and drivers for the Kodak branded version are available for download from this site.
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. |
Kodak Branded Scanner Driver
Upgrade to VRS 5.1
Installing the scanner drivers from the link on the bottom of this page will install the latest OEM VRS, TWAIN Data Source, ISIS Driver and WIA/STI drivers for a Kodak branded Trūper 3210 or 3610 Scanner. For more information please read the Release Notes posted on this page. Note: You must unzip the downloaded file in a separate directory and then run the Setup.exe file.
Please note that the User Utility and drivers on this installation CD will only work with a Kodak Branded Scanner. If your scanner is not KODAK branded you must first update your scanners firmware to the Kodak firmware version that has been provided as a download on this website.
If your scanner displays in Windows Device Manager as a Kodak Scanner as shown below then your scanner is a Kodak branded Trūper 3210 or 3610 Scanner:
Operating Systems tested on include:
- WINDOWS XP Pro (32bit only)
- WINDOWS Vista (32bit and 64bit)
- WINDOWS 7 (32bit and 64bit)
- WINDOWS 8 (32bit and 64bit)
|
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement |
Specifications
3610: Simplex and Duplex
Black-and-White, Grayscale, Color
(Letter Size, Landscape, 200 dpi)
Duplex 190 ipm (images per minute)
Black-and-White or Grayscale Output: 100–600 dpi
Color Output (with the VRS application): 100–400 dpi
*screen images are appended to 254 cm (100 in.)
3610: 48 x 44 x 29 cm (18.9 x 17.3 x 11.4 in.)
3610: 21 kg (47 lbs.)
and Consumption
- Scanning: <90 W
- Standby: <27 W
- Sleep Mode: 2.0 W
220-240 VAC, 50/60 Hz
- Scanning: <80 W
- Standby: <27 W
- Sleep Mode: <3.5 W
Operating Temperature and Humidity
Humidity: 30% to 80% RH non-condensing
As an Energy Star® Partner,Eastman Kodak Company has determined that these products meet Energy Star® guidelines for energy efficiency.
Operating System Compatibility
Operating System Compatibility Definitions
Supported – Kodak Validated
- Windows XP Pro SP2/SP3 (32-bit)
- Windows Vista (32-bit )
- Windows 7 (32-bit )1
- Windows 7 (64-bit )1
- Windows 8 (32- and 64-bit )1
- Windows 8.1 (32- and 64-bit )1
- Windows 10 (32- and 64-bit, Tested on Release 1507 only)1
NOTES:
- Only current Kodak Branded firmware and drivers are supported. Older BBH branded firmware and drivers are not supported.
Data Security
Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.
This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).
Volatile memory is used to store customer image data. It is erased when the device is turned off.
Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.
The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.
NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.
FAQ
Do you want to get the most from our products? Read frequently asked questions about this product.
Ask a Question
Have a question? Complete the information below and we will contact you.
ABOUT THE ALARIS DIVISION OF KODAK ALARIS
Kodak Alaris is a leading provider of information capture and intelligent document processing solutions that simplify business processes. We exist to help the world make sense of information with smart, connected solutions powered by decades of image science innovation. Our award-winning software, scanners, and professional services are available worldwide and through our network of channel partners.
Partners
Privacy Notice | Legal / Site Terms | California Notice at Collection | Do Not Share My Personal Information
© 2024 Kodak Alaris Inc. TM/MC/MR: Alaris, ScanMate. All trademarks and trade names used are property of their respective holders. The Kodak trademark and trade dress are used under license from Eastman Kodak Company.